Print Head / Ink | |
Type | Permanent (Replaceable) |
Number of Nozzles | Black: 640 nozzles (Optional Colour: 1152 nozzles) |
Ink Bottles / Cartridges | GI-70 (Pigment Black) Optional: CL-741, CL741XL |
Maximum Printing Resolution | 600 (horizontal)*1 x 1200 (vertical) dpi |
Print Speed*2
Based on ISO/IEC 24734 |
|
Document (ESAT/Simplex) | Approx. 13.0 ipm (black) / 6.8 ipm (colour) |
Document (ESAT/Duplex) | Approx. 4.8 ipm (black) / 2.8 ipm (colour) |
Document (FPOT Ready / Simplex) | Approx. 9 sec (black) / 14 sec (colour) |
Printable Width | Up to 203.2mm (8″) |
Printable Area | |
Borderless Printing*3 | – |
Bordered Printing | #10 Envelope/DL Envelope: Top 8 mm / Bottom 12.7 mm / Right 5.6 mm / Left 5.6 mmLTR / LGL: Top 3 mm / Bottom 5 mm / Right 6.3 mm / Left 6.4 mmOthers: Top 3 mm / Bottom 5 mm / Right 3.4 mm / Left 3.4 mm |
Bordered Auto 2-Sided Printing | Top / Bottom margin: 5 mm, Left / Right margin: 3.4 mm (LTR: Left: 6.4 mm, Right: 6.3 mm) |
Support Media | |
Rear Tray | Plain Paper (64 – 105 g/m²) High Resolution Paper (HR-101N) Envelope |
Cassette | Plain Paper (64 – 105 g/m²) |
Paper Size | |
Rear Tray | A4, A5, B5, LTR, LGL, Envelopes (DL, COM10), Card Size (91 x 55 mm)
[Custom size] * F4 is possible via custom size settings. |
Cassette | A4, A5, B5, LTR
[Custom size] * F4 is possible via custom size settings. |
Paper Handling (Maximum Number) | |
Rear Tray | Plain Paper (A4, 64 g/m²) = 100 High Resolution Paper (HR-101N) = 80 |
Cassette | Plain Paper (A4, 64 – 105 g/m²) = 250 |
Support Media for Auto 2-sided printing | |
Type | Plain Paper |
Size | A4, A5, B5, LTR |
Paper Weight | |
Rear Tray | Plain Paper: 64 – 105 g/m² |
Cassette | Plain Paper: 64 – 105 g/m² |
Ink End Sensor | Electrode type and dot count type combined Optional colour cartridge; Dot count |
Print Head Alignment | Auto/Manual |
Network
Protocol | TCP/IP, SNMP |
Wired LAN | |
Network Type | IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) |
Data Rate | 10M/100Mbps (Auto switchable) |
Wireless | |
Network Type | IEEE802.11b/g/n |
Frequency Band | 2.4 GHz |
Channel*4 | 1 – 13 |
Range | Indoor 50 m (Depends on the transmission speed and conditions) |
Security | WEP64/128 bit WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) |
Direct Connection (Wireless LAN) | Available |
Printing Solutions
Canon Print Service for Android |
Available |
PIXMA Cloud Link (from smartphone/tablet) |
Available |
Canon PRINT Inkjet/SELPHY (for iOS/for Android) |
Available |
System Requirements
Windows 10 / 8.1 / 7 SP1 (Operation can only be guaranteed on a PC with a pre-installed Windows 7 or later) |
General Specifications
Interface | USB 2.0 |
Operating Environment*6 | |
Temperature | 5 – 35°C |
Humidity | 10 – 90% RH (no dew condensation) |
Recommended Environment*7 | |
Temperature | 15 – 30°C |
Humidity | 10 – 80% RH (no dew condensation) |
Storage Environment | |
Temperature | 0 – 40°C |
Humidity | 5 – 95% RH (no dew condensation) |
Quiet Mode | Available |
Acoustic Noise (PC Print) | |
Plain Paper (A4, B/W)*8 | Approx. 52.0 dB(A) |
Power | AC 100-240 V, 50/60 Hz |
Power Consumption | |
OFF | Approx. 0.3 W |
Standby (scanning lamp is off) USB connection to PC |
Approx. 0.8 W |
Standby (all ports connected, scanning lamp is off) [EU only – for ErP Lot 26 regulation] |
Approx. 1.6 W |
Time to enter Standby mode [EU only – for ErP Lot 26 regulation] |
Approx. 1 min 29 sec |
Printing*9 USB connection to PC |
Approx. 13 W |
Duty Cycle | Up to 15,000 pages/month |
Dimension (WxDxH) | |
Factory Configuration | Approx. 403 x 369 x 166 mm |
Output/ADF trays extended | Approx. 403 x 695 x 356 mm |
Weight | Approx. 6.0 kg |
Page Yield
Plain Paper (A4 pages) (ISO/IEC 24712 test file)*10 |
Standard: GI-70 PGBK*11: 6,000Economy: GI-70 PGBK: 8,300Optional: CL-741: 180 CL-741XL: 400 |
You can find the required drivers for this product by clicking the button below which will send you to the official site.
Canon PIXMA GM2070 Inkjet Printers Brochure
Reviews
There are no reviews yet.